Pricing
How much does garage door panel replacement cost?
Garage door panel replacement costs $250 to $600 per section fitted, with the panel itself $150 to $450. Two things decide whether a single panel is even an option: whether a matching section still exists for your door, and whether the colour will match after years of sun.
- Typical cost, fitted
- $250–600
- Can you do it yourself?
- No — stored spring tension
Where the money goes
- Parts
- $150–450
- Labor, and everything else
- $0–450
Approximate, from the midpoint of each range. Parts are roughly 71% of a typical panel replacement invoice.
What moves the price
- Which section
- The bottom section is the most commonly damaged and the most involved to replace, because the cables and bottom brackets attach to it.
- Availability
- Clopay's scale keeps sections available longest. Discontinued designs and small regional brands are where single-panel repair falls down.
- Insulation
- A polyurethane-insulated section costs more than a single-skin steel one, roughly $80 to $200 more.
- Windows
- A section with glazing costs $100 to $300 more than a solid one.
- Colour match
- A door that has been in sun for a decade will not match a new panel. Painting the whole door afterwards adds $200 to $500.
The tell for a bad quote
Being told a full door replacement is required without anyone checking the manufacturer label for section availability. That check takes two minutes and is the difference between $400 and $1,800.
When a single panel is the right call
If the damage is confined to one section, the door is otherwise square, the tracks are straight and a matching section is available, replacing the one panel is straightforwardly the correct answer. $250 to $600 against $1,000 to $4,000 for a new door.
Start with the manufacturer label, usually on the end stile of a section or on the top panel. That identifies the model and series, which is what a supplier needs to tell you whether the section still exists.
The two things that force a full replacement
The first is availability. If the model is discontinued and no matching section exists, there is nothing to fit. A mismatched panel in the middle of a door looks worse than a dent and can throw the door out of square.
The second is accumulated damage. If two or more sections are damaged, or the door has been driven into hard enough to bend the track and twist the frame, the sum of the repairs approaches the cost of a new door — and you would be putting new panels into a compromised structure.
Everything else is a repair. A dent that has not creased the section across its full width is cosmetic; it does not affect how the door runs and can be left indefinitely if you can live with the look.
Doing it yourself — the honest answer
Replacing a section means disconnecting hinges and rollers on a door held up by wound springs, and on the bottom section it means working directly against cable tension. The panel also has to be squared to the sections above and below or the whole door binds in the track.
Common questions
How much does it cost to replace one garage door panel?
Garage door panel replacement costs $250 to $600 per section fitted. The panel itself is $150 to $450, with insulated and glazed sections at the higher end. Whether a matching section still exists for your model is the deciding factor.
Is it worth replacing a garage door panel or should I replace the whole door?
Replace the single panel if only one section is damaged, the door is still square and a matching section is available — $250 to $600 against $1,000 to $4,000. Replace the whole door if two or more sections are damaged, the frame is twisted, or the model is discontinued and no matching section exists.
Does a dent in a garage door need fixing?
Not usually. A dent that has not creased the section across its full width is cosmetic and does not affect how the door runs, so it can be left indefinitely. A section creased right across has lost rigidity and should be replaced.
Get a tech dispatched
Tell us what the door is doing and where you are. We'll connect you with a licensed contractor in your area — usually within the hour.
We pass your details to one licensed contractor serving your ZIP. We don't sell your information to multiple companies. Privacy