Centerville, Davis County, UT
Garage door repair in Centerville
Local failure data, published pricing, and a licensed contractor dispatched in Centerville.
Centerville conditions
Local dataFreeze–thaw / yr
NaN
Below national median
Spring lifespan
NaN–NaN yrs
vs 10 yrs rated
Elevation
1,300 m
Drives the freeze–thaw count
Median home built
1987
Most past first opener
Freeze–thaw figure is the 1991–2020 normal at Salt Lake City Intl AP, the nearest comparable NOAA station (18km away), from GHCN-Daily records. A freeze–thaw day is one where the temperature crosses 0 °C in both directions.
Most doors here are past their first opener
The median home in Centerville was built in 1987. That matters more than it sounds: a door of that age is typically on its second opener and its original springs are long past their rated life.
With NaN freeze–thaw cycles a year, springs in Centerville run NaN to NaN years. On a house from 1987 that means several replacements have already been due.
Sections interlock and are joined by hinges, so a single damaged panel can usually be swapped — if the manufacturer still makes that section.
When springs break in Centerville
Freeze–thaw days per month, averaged over 30 years. 94% fall between November and March, and January is the worst of them.
View as table
| Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 18 | 16.7 | 9.7 | 2.9 | 0.2 | 0 | 0 | 0 | 0 | 2.1 | 13.7 | 17.4 |
January alone brings 18 of the year's 81 freeze–thaw days. A spring already near the end of its life usually goes inside that window rather than gradually, which is why Centerville technicians are busiest in the first cold snap after New Year. Source: NOAA GHCN-Daily, Salt Lake City Intl AP, 1991–2020.
How much does garage door repair cost in Centerville?
Garage door repair in Centerville, UT costs $125 to $580 for most jobs. Torsion spring replacement — the most common call — runs $220 to $580 for a pair, including parts and labor.
| Repair | Parts + labor | Time on site |
|---|---|---|
| Torsion spring (pair) | $220 – $580 | 60–90 min |
| Opener repair | $150 – $400 | 45–90 min |
| Cable off drum | $140 – $260 | 45–60 min |
| Safety sensor alignment | $125 – $300 | 30–45 min |
What we get called out for most in Centerville
How Centerville compares nearby
Same metro, measurably different conditions.
| City | Freeze–thaw / yr | Spring life | Median built |
|---|---|---|---|
| Centerville | NaN | NaN–NaN yrs | 1987 |
| Bountiful | NaN | NaN–NaN yrs | 1972 |
| Woods Cross | NaN | NaN–NaN yrs | 1999 |
| Farmington | NaN | NaN–NaN yrs | 2001 |
| North Salt Lake | NaN | NaN–NaN yrs | 2003 |
| Kaysville | NaN | NaN–NaN yrs | 1994 |
Common questions in Centerville
How long do garage door springs last in Centerville?
Garage door torsion springs in Centerville, UT last NaN to NaN years, against the 10 years a standard 10,000-cycle spring is rated for. Centerville averages NaN freeze–thaw cycles a year, and each cycle fatigues the spring steel.
Do I need a permit to replace a garage door in Centerville?
Generally no. Centerville, UT does not require a permit for like-for-like garage door replacement, though repairs and spring replacement are exempt either way. Confirm with the local building department before scheduling.
Get a tech dispatched
Tell us what the door is doing and where you are. We'll connect you with a licensed contractor in Centerville — usually within the hour.
We pass your details to one licensed contractor serving your ZIP. We don't sell your information to multiple companies. Privacy