Garage door noisy at one specific point in the travel
This is almost always a a single worn roller, or a damaged section of track. Repair costs $130 to $290 and takes 45 to 60 minutes. Safe to operate: Yes, but book it.
Check this first — it may cost you nothing
Run the door slowly and note where the noise happens, then look at that exact point in both tracks. A flat spot on a roller or a dent in the track is usually visible.
Why this happens
Noise that happens at the same place every cycle is a location problem, not a lubrication problem. Something at that point in the track is damaged, or a roller reaches its worn spot there.
Noise at the same point each cycle is one component announcing itself — usually a single failed roller bearing or one dry hinge at that height.
Less likely, but possible
- A dent in the track from a stored item leaning against it
- A single roller with a collapsed bearing
- A loose track bracket at that height
What happens if I ignore it?
A damaged point in the track keeps damaging whatever passes through it. One worn roller becomes several, and a dented track eventually stops holding rollers at all.
The repair: roller and hinge repair
Garage door roller replacement costs $130 to $290 for a full set of ten to twelve, and takes about an hour. Grinding and rattling is the usual sign, and worn rollers accelerate wear on the track and the opener if they are left.
Read the full roller and hinge repair guide →Get a tech dispatched
Tell us what the door is doing and where you are. We'll connect you with a licensed contractor in your area — usually within the hour.
We pass your details to one licensed contractor serving your ZIP. We don't sell your information to multiple companies. Privacy